How Can We Help?
Home / Support Center / Knowledge Base / D50 (printing, digitizing) / Do you have a D50 5000K and 4000K in 90+ CRI?
Do you have a D50 5000K and 4000K in 90+ CRI?
We are interested in your D50 5000K model 4026.2F.50 light fixture, T8 tubes model 4024.50.4P, or perhaps the Flexible Strip 7101.50 mounted to the aluminum channel and quite possibly a combination of all. Key is D50 5000K 90+ CRI. Also looking for something similar in 4000K
The ABSOLUTE SERIES is not available in 4000K, but the T8 lamps and T5 integrated fixtures are available in 4000K. The part numbers are 4024.40 and 4026.2F.40, respectively.
We are concerned about UV and IR from the above lamps. I realize output in these regions would be low, but is there a way to quantify what level is considered damaging to artwork, photographs, documents, etc.
We do not have any data on hand for this, but I would expect that this can certainly be quantified in irradiance units (e.g. mw/cm2) accompanied by a wavelength range (e.g. UV-A), or 340-400 nm). If your customer has any specific requirements in terms of irradiance, that would be very helpful for us to verify compliance; if not, a starting point may be showing them our photometric reports which show essentially no energy emission in the UV and IR regions.
Question posted under:
LED strip lightsT8 LED tube lightsT5 linear fixturesD50 (printing, digitizing)