SHOP BY APPLICATION    SHOP BY APPLICATION   
SHOP BY PRODUCT TYPE    SHOP BY PRODUCT TYPE   
SHOP BY COLOR    SHOP BY COLOR   
RESOURCES    RESOURCES   
REACH OUT    REACH OUT   

How Can We Help?

                                                                                                                                                                                                                                                                                                                                                                
Your search results are loading...
No results match your query. Please try a different search.

Home /  Support Center /  Knowledge Base /  LED dimmers /  Recommended Flexible LED Strip Light for Celtic Harp

Recommended Flexible LED Strip Light for Celtic Harp


I need a sticky back flexible light strip to tape to the underside neck of a Celtic Harp. Most strings are whitish, and some are red and blue. Certain stage lighting can cause a vibrating string to become invisible = not good. What K value of light would work best?

Based on the details provided, it sounds as though a low flicker rate of the stage lighting may be causing the vibrating strings to appear invisible, rather than the ‘Kelvin’ color temperature of the lights. As such, we would likely recommend utilizing a flicker-free power supply to pair with our flicker-free LED Strip Lights in your preferred color temperature to solve the issue at hand. 

While we are not familiar with the most common color temperatures of lighting that might be used for cello stage performances, we are happy to confirm that our LED strip lights are available in a broad set of color temperature options. Further, we can confirm that color temperatures are not linked to flicker rates, as each of our color points allows for flicker-free output. 

For powering the cello-attached LED strip lights, we would recommend the FilmGrade™ DC Power Supply for LED Strip. This product can provide flicker-free output and can be connected to wall sockets for power. As many of our LED Strip Lights are available in both 12V and 24V options, we recommend selecting a power supply of a matching voltage. 

Which Strip do you recommend?

-Considering I will be using a 12 V Lithium Battery Pack for boosting batteries (Electrical Instrumentation background)

-I need 3K to 4K light tone and 10 ft flexible sticky back strip

-Since it is against wood (classical harp), do I need to be concerned with heat

Based on the details provided, we would likely recommend our 16.4 ft (5-meter) reel of the 3200K FilmGrade™ WHITE LED Strip Lights. These strips have designated cut points every .984” (25 mm) which can be used to divide them into the preferred lengths. 

As can be noted within the referenced article, we have measured an average temperature rise of 54°F (30°C) over ambient temperatures. If the wood material or finish upon the wood is sensitive to such rises in temperature, we would recommend selecting a third-party light product that has a lower LED density to protect the material. 

While batteries could potentially be used to power the LED Strip Lights, we generally recommend pairing them with a FilmGrade™ DC Power Supply for LED Strip. A dimmer can also be connected in-line to adjust the output. 


Question posted under:

LED power suppliesLED strip lightsLED dimmersLED Drivers


Related Knowledge Base Questions


‹   Knowledge Base Home