How Can We Help?
Home / Support Center / Knowledge Base / LED power supplies / Color Critical Lighting for Cultural Heritage Field
Color Critical Lighting for Cultural Heritage Field
I would like to know if you have a product using the Toshiba TRI-R LEDs. We are involved in the Cultural Heritage field and need a better solution for lighting than currently available products. I am looking for a lighting solution similar to your flexible panels with the lighting spectral quality of the TRI-R-led specifications for proof of product assembly.
We are not affiliated with Toshiba but we do have a line of 99 CRI products that may closely approximate the color rendition performance you are looking for.
Below is our product page showcasing our ABSOLUTE SERIES 99 CRI products - please let us know if this is something that may work for your needs, and we would be more than happy to assist with any additional questions or concerns!
From your link, I think we would need the equivalent of 52 strips to make 2 panels approximately 22”x 11” with full coverage over the area. Is there a connector solution that would work for that? Or do you have an option for the absolute series in an already-made panel about that size?
I would also need a power supply/driver to power 2 panels about that size. As well as a dimming module to work with to set output.
Unfortunately, we do not have any panel-type products, although I completely agree that this would be an ideal use case for such a product.
As such, the best alternative would be to use an array of LED strip lights as you suggest. In back-calculating from the suggested quantity, it appears that you would be looking at 26 rows of 22-inch length LED strip sections per panel.
This works out to approximately 48 feet or three reels of 16.4 feet each.
The general limitation for LED strip wiring is 16.4 feet (one reel) per power supply and dimmer connection. This is due to the current carrying capacity limitations in the LED strip as well as those of the power supply.
As such, your single panel will require three separate sets of power supplies and dimmers, which may or may not be an issue for you from a feasibility perspective.
Each LED strip reel can be cut into as many shorter sections as needed; so each 16.4 ft reel, for example, can be cut into 9 separate sections of 22 inches each, and then re-joined using our solderless connector accessory PN 3071.
(For a visual overview of the components, here is an example layout for a similar configuration using our 24 volt / 95 CRI product which operates nearly identically from an electrical perspective: https://www.waveformlighting.com/layoutmaps/3002_3E)
Question posted under:
LED power suppliesLED strip lightsLED dimmersColor matching