How Can We Help?
Home / Support Center / Knowledge Base / LED power supplies / Wiring Multiple UV LED Strip Lights
Wiring Multiple UV LED Strip Lights
I have an application where I need to daisy chain 112ft of UV led strips (7021.95.5M) in 31" lengths in area 30" x 35". This would take 8 x 16.4ft lengths, but what's the power requirement of this, and what would be the best way to wire this? What other product numbers would I need?
Our PN 7021.95.5M LED strip lights are very easy to set up and require just a plug-in power supply unit. Each power supply has a DC plug that can connect directly to the LED strip reel.
Below is an example layout showing our 3.2 ft short reel (the 16.4 ft long reel would be configured the same): https://www.waveformlighting.com/layoutmaps/7021_4A?px=-2155&py=-2617&pw=1310&ph=2234&s=0.1
We've linked to the power supply product below:
Unfortunately, the LED strips cannot be daisy-chained past the 16.4 ft length per run. As such, you will need to utilize 8x separate power supplies to power the 8x reels of 16.4 ft. This is due to the internal circuitry as well as power supply capacity limitations when running low voltage electronics.
Question posted under:
LED power suppliesLED strip lightsLED Drivers