Home / Support Center / Knowledge Base / Ultraviolet (fluorescence, blacklights) / UV-C LED Strip Light for Fluorescent Mineral Display
UV-C LED Strip Light for Fluorescent Mineral Display
I want to install UV shortwave lighting for my fluorescent mineral display. The minerals are on two shelves, each about 30 inches long and 6 inches wide. I believe the UV-C LED strip light will work. I am planning to buy the Filmgrade DC power supply. Is that the right power supply for what I want to do? How do I hook up the two strips (each 1/2 segment of the original)? Is there a way to do this without having to buy two power supplies?
I am happy to confirm that the 12V FilmGrade™ DC Power Supply for LED Strip is indeed compatible with the realUV™ LED Strip Lights.
Please feel free to utilize our return policy, if the realUV™ LED Strip Lights wind up not working well for your mineral display. For your testing purposes, please note that we are unable to accept returns for LED strip light products that have been cut or altered, including the removal of the adhesive liner.
Regarding installing multiple strips, there are a few configurations that might work for your installation. I have provided layout links below which illustrate these configurations further. To utilize two strip segments powered by one power supply, you may benefit from using the LED Strip-to-Strip product.
LayoutMaps™ - LED Strip Light Layout 7021_4B: https://www.waveformlighting.com/layoutmaps/7021_4B?px=-2278.5&py=-2245.5&pw=1557&ph=1491&s=0.1
LayoutMaps™ - LED Strip Light Layout 7021_4C: https://www.waveformlighting.com/layoutmaps/7021_4C?px=-2278.5&py=-2245.5&pw=1557&ph=1491&s=0.1
Do I have to unroll the entire LED strip to test it? I would like to test it using just half the length, then test using just 15 inches and finally test it using just 8 inches.
Can I daisy chain two pieces (one will not have a DC connector) for my display and then use the third piece (with the second DC connector) somewhere else?
We're happy to confirm that the cleanUV™ UV-C LED Strip Light item can be removed from the reel, as well as tested without altering the product.
To daisy-chain the individual UV-C barrel jack lengths together, we sell a product called the Daisy-Chain DC Connector for UV LED Strips, which might prove to be useful.
Further, to connect the individual cut segments, we might recommend the LED Strip to Strip product.
For powering the product, we recommend a 12V DC power supply, such as our FilmGrade™ DC Power Supply for LED Strip product.
Question posted under:
LED power suppliesUltraviolet (fluorescence, blacklights)UV-A LED strip lights