SHOP BY APPLICATION    SHOP BY APPLICATION   
SHOP BY PRODUCT TYPE    SHOP BY PRODUCT TYPE   
SHOP BY COLOR    SHOP BY COLOR   
RESOURCES    RESOURCES   
REACH OUT    REACH OUT   
Your LayoutMap™ is Loading...Please Wait
The following illustration shows the wiring and component configuration used to power low voltage LED strip lights from a standard wall-plug outlet, with an inline dimmer installed. This is an ideal configuration for both residential and commercial installations where a dimmable "plug and play" solution is preferred, without the hassle of behind-the-wall rewiring and electrical work.

In this example layout, we connect Waveform Lighting's power supply unit to a full reel of CENTRIC HOME™/DAYLIGHT™ 95 CRI LED Strip Lights, with the FilmGrade™ Flicker-Free Inline Dimmer in between. Because the LED strip light does not have a corresponding DC barrel jack receptacle, we use the PN 7094 adapter to connect the power supply output to the LED strip wires.



← Back to all LayoutMaps™

image/svg+xml MODEL: YHY-2400500P/N:DS240120C14-WINPUT:AC100-240V~ 50-60hZ, 2.5AOUTPUT: 24V = 5.0A +- DC 24V DC 24V +- +- DC 24V DC 24V +- +- DC 24V DC 24V +- +- DC 24V DC 24V +- +- DC 24V DC 24V +- +- DC 24V DC 24V +- +- DC 24V DC 24V +- +- DC 24V DC 24V +- +- DC 24V DC 24V +- +- DC 24V DC 24V +- +- DC 24V DC 24V +- +- DC 24V DC 24V +- +- DC 24V DC 24V +- +- DC 24V DC 24V +- +- DC 24V DC 24V +- +- DC 24V DC 24V +- +- DC 24V DC 24V +- +- DC 24V DC 24V +- +- DC 24V DC 24V +- +- DC 24V DC 24V +- +- DC 24V DC 24V +- +- DC 24V DC 24V +- +- DC 24V DC 24V +- +- DC 24V DC 24V +- +- DC 24V DC 24V +- +- DC 24V DC 24V +- +- DC 24V DC 24V +- +- DC 24V DC 24V +- +- DC 24V DC 24V +- +- DC 24V DC 24V +- +- DC 24V DC 24V +- +- DC 24V DC 24V +- +- DC 24V DC 24V +- +- DC 24V DC 24V +- +- DC 24V DC 24V +- +- DC 24V DC 24V +- +- DC 24V DC 24V +- +- DC 24V DC 24V +- +- DC 24V DC 24V +- +- DC 24V DC 24V +- +- DC 24V DC 24V +- +- DC 24V DC 24V +- +- DC 24V DC 24V +- +- DC 24V DC 24V +- +- DC 24V DC 24V +- +- DC 24V DC 24V +- +- DC 24V DC 24V +- +- DC 24V DC 24V +- +- DC 24V DC 24V +- +- DC 24V DC 24V +- +- DC 24V DC 24V +- +- DC 24V DC 24V +- +- DC 24V DC 24V +- +- DC 24V DC 24V +- +- DC 24V DC 24V +- +- DC 24V DC 24V +- +- DC 24V DC 24V +- +- DC 24V DC 24V +- +- DC 24V DC 24V +- +- DC 24V DC 24V +- +- DC 24V DC 24V +- +- DC 24V DC 24V +- +- DC 24V DC 24V +- +- DC 24V DC 24V +- +- DC 24V DC 24V +- +- DC 24V DC 24V +- +- DC 24V DC 24V +- +- DC 24V DC 24V +- +- DC 24V DC 24V +- +- DC 24V DC 24V +- +- DC 24V DC 24V +- +- DC 24V DC 24V +- +- DC 24V DC 24V +- +- DC 24V DC 24V +- +- DC 24V DC 24V +- +- DC 24V DC 24V +- +- DC 24V DC 24V +- +- DC 24V DC 24V +- +- DC 24V DC 24V +- +- DC 24V DC 24V +- +- DC 24V DC 24V +- +- DC 24V DC 24V +- +- DC 24V DC 24V +- +- DC 24V DC 24V +- +- DC 24V DC 24V +- +- DC 24V DC 24V +- +- DC 24V DC 24V +- +- DC 24V DC 24V +- +- DC 24V DC 24V +- +- DC 24V DC 24V +- +- DC 24V DC 24V +- +- DC 24V DC 24V +- +- DC 24V DC 24V +- +- DC 24V DC 24V +- +- DC 24V DC 24V +- +- DC 24V DC 24V +- +- DC 24V DC 24V +- +- DC 24V DC 24V +- +- DC 24V DC 24V +- +- +- DC 24V DC 24V +- GNDWire to Ground FilmGrade™ DC Power Supply PART NUMBER 3092 STANDARD WALL-PLUG OUTLET AC 120/240V CENTRIC HOME™/DAYLIGHT™ 95 CRI LED STRIP LIGHTS (24V)PART NUMBER 3004 LINE VOLTAGE NEUTRALAC 120V/240V LINE VOLTAGE HOT/LIVEAC 120V/240V This power supply unit converts line voltage AC (100-240 volts) to low voltage DC output needed for LED strip operation. The unit plugs directly into any standard wall-plug outlet, and includes a male DC barrel jack connector on the DC output end.This product cannot be used with traditional wall-dimmers (e.g. Lutron / Leviton) but can be dimmed via an inline-dimmer connected on the DC output side. INPUT: AC 100-277 V + DIMMING OUTPUT: DC 24V The FilmGrade power supply includes a US-style two-prong plug that will fit in any standard wall-plug outlet. For use outside of North America, a voltage transformer is not needed, but a plug adpater may be necessary. INPUT: DC 24V This LED strip has 16 AWG wires pre-mounted on both ends of the reel. The wire length is 13.8 inches (35 cm) and has tips stripped and tinned for quick and easy connection to power supply leads. This LED strip is configured as a 16.4 ft (5 meter) reel. It can be cut to shorter lengths as needed, in 2 inch (50 mm) increments using a pair of scissors.This configuration shows the entire reel used in a single continuous run without any turns or interruptions. Cable Length: 48 in (1200 mm) | NOT DRAWN TO SCALE INPUT: AC 100-240 V Cable Length: 48 in (1200 mm) | NOT DRAWN TO SCALE The PN 7094 Female DC Adapter is a convenient adapter that allows for a quick connection between a male DC barrel connector plug and a pair of positive and negative wires. Wires are secured in place via clamps that can be tightened by the pair of screws.In this setup configuration, PN 7094 is used to connect the output end of the power supply to the LED strip wires. PN 7094 Female DC Adapter PART NUMBER 7094 Standard DC Barrel Connector(5.5 x 2.1 mm) If leaving leads attached, we recommend terminatingor insulating wires to reduce short circuit risk If last LED strip section is cut, the LED strip doesnot require any insulation or protection as the riskof a short circuit or electric shock across the copperpads is relatively low due to the low voltage DC design. Standard NEMA 2-Prong Plug Unlike a traditional wall-mount dimmer, this dimmer is designed to be installed between the power supply and the LED strip. As such, it operates on DC low voltage only, and is completely isolated from the AC line voltage circuit.The dimmer features completely flicker-free light output from 0-100%, and includes DC barrel jack connectors on both ends (one male / one female), allowing it to seamlessly fit into an existing LED strip installation. FilmGrade™ Flicker-Free PWM Inline Dimmer PART NUMBER 3081 Standard DC Barrel Connector(5.5 x 2.1 mm) Cable Length: 48 in (1200 mm) | NOT DRAWN TO SCALE Cable Length: 48 in (1200 mm) | NOT DRAWN TO SCALE