High CRI Lighting for Rebuilding a Studio

I am rebuilding my studio and am very excited about your high CRI lighting. Is it approved for use in Canada? My studio is 22x27 with 10 feet ceilings. I was thinking of the LED tube lighting - is this the best source?

By placing the dimensions into our Lumen Estimation Calculator, it appears that the space would be fully illuminated by 16-22 T8 LED Tube Lamps, though some of our customers prefer to illuminate just the working areas instead of the full space. 

For studio spaces we often recommend the 5000K or 6500K color temperature T8 LED Tube Lights since they can be more easily replaced if they encounter failures easier than the LED Strip Lights in our catalog can. These lights are suitable for use in Canada and are compatible with 120, 208, 240, or 277 V AC input voltages. 

While our T8 LED Tube Lights are compatible with some ballasts found within fluorescent fixtures, we recommend bypassing incompatible ballasts using the installation guide for operation. 

​Hardware damage may occur which would void the warranty if incompatible ballasts are used. As an alternative, our LED Ready T8 Fixtures do not require any rewiring for operation. 

What is the lighting difference between the two different types of your light fixtures. What are the advantages? How much area is covered by each light fixtures, and are they best to be butted against each other or allow space between? If there is space in between, what is the best distance without seeing a drop in lighting intensity? 

The primary difference between the LED Ready T8 Fixture models is that the Wrap Fixture with Prismatic Lens is designed to evenly diffuse the light, though it will reduce overall transmission by roughly 10%. This diffusion is also slightly more aesthetically pleasing than the Strip Fixture with Reflector. 

​Comparatively, the Strip Fixture with Reflector can be quite helpful for better dispersing the light in a space and directing light downward. This fixture also maximizes the total light output, and would not encounter any transmission loss as the Wrap Fixture with Prismatic Lens will. 

We generally recommend spacing the light sources evenly throughout a space to create a uniform light distribution, although we do not have a specific rule for the distance between the light fixture units. We do apologize for any impact this may have on your purchase planning. 

Question posted under:

T8 LED tube lightsArt studio lightingLED-ready T8 Fixtures

Related Knowledge Base Questions

‹   Knowledge Base Home